Ceiling FansHugger
WAC F-036L- Ceiling Fan Manual
Setup, everyday use, maintenance and troubleshooting for the 44 in. indoor/outdoor hugger ceiling fan, with verified specifications.
- Blade span44 in.
- Efficiency163 CFM/W
- Power (high)25.4 W
- Rated forIndoor & outdoor
About the WAC F-036L-
WAC model F-036L- is a 44 in. indoor/outdoor hugger ceiling fan that meets ENERGY STAR efficiency requirements. A 44 in. blade span is generally suited to rooms of roughly 144–225 sq. ft., such as a bedroom or kitchen.
As a hugger (low-profile) model, it mounts close to the ceiling without a downrod, which suits rooms with ceilings under about 8 ft. It is listed for both indoor and outdoor use. It also has connected controls (Bluetooth, Wi-Fi).
Its rated airflow efficiency is 163 CFM per watt, and it draws 25.4 W on high with 1.4 W of standby power. That efficiency is higher than 46% of the 167 Hugger models in our database.
Specifications
| Brand | WAC |
|---|---|
| Model number | F-036L-** |
| Fan type | Hugger |
| Blade span (diameter) | 44 in. |
| Indoor / outdoor rating | Indoor/Outdoor |
| Light kit included | No |
| Airflow efficiency | 163.0 CFM/W |
| Power at high speed | 25.4 W |
| Standby power | 1.4 W |
| Smart / connected features | Yes |
| Connectivity | Bluetooth, Wi-Fi |
| Fan components warranty (as listed) | 5 years |
| ENERGY STAR Most Efficient | No |
Safety information
- Turn off power at the circuit breaker — not just the wall switch — before installing, wiring or servicing the fan, and confirm the power is off with a non-contact voltage tester.
- Mount the fan only to an electrical box marked as acceptable for fan support (or to a fan-rated brace), secured directly to the building structure. Ordinary light-fixture boxes are not designed to carry a moving fan.
- Keep the lowest point of the blades at least 7 ft above the floor and well clear of furniture, bunk beds, cabinets and doors.
- If you are not comfortable with household wiring, have the fan installed by a licensed electrician in accordance with local codes.
- Do not bend blade brackets or mix blades from different sets — this upsets the balance and can loosen hardware.
- Outdoor fans are listed either for damp locations (covered porches) or wet locations (exposed to rain). Check the rating on the fan's label before installing it where it can get wet, and use a GFCI-protected circuit where the code requires it.
Installation and first-time setup
With a 44 in. (112 cm) blade span, center the fan in the room or over the main seating area and keep the blade tips at least 18 in. from walls and sloped ceilings. Hugger fans mount close to the ceiling, which is ideal for low ceilings but gives slightly less airflow than a downrod fan of the same size.
- Check the electrical box
Confirm the ceiling box is metal or plastic marked for fan support and fastened to a joist or a fan-rated brace. Replace it if it is a standard light box.
- Assemble on the floor
Unpack all parts, check them against the parts list, and pre-assemble the downrod or mounting bracket, canopy and motor housing as the manual describes. Leave the blades off until the motor is hung, if the manual allows.
- Hang the motor
Attach the mounting plate to the box and lift the motor onto it, engaging the hanging tabs or screws before letting go.
- Make the wiring connections
Connect the supply wires as the wiring diagram shows — typically black (hot) to black, white (neutral) to white, and the green or bare wire to ground — using properly sized wire connectors. If a receiver for a remote or wall control is supplied, install it in the canopy as shown.
- Attach blades and light
Fasten each blade securely and tighten every screw evenly. Restore power and test every speed.
- Balance the fan
If the fan wobbles noticeably on high, check that all blade and bracket screws are tight, then use the balancing kit supplied with the fan to find and correct the light blade.
Using your ceiling fan
Summer and winter direction
In warm weather, run the fan counterclockwise (as seen from below) so the blades push air down and create a cooling breeze. In cold weather, switch to clockwise on low speed to gently draw air up and push warm air that collects at the ceiling down along the walls without creating a draft. Stop the fan completely before changing direction.
Saving energy with a ceiling fan
A ceiling fan cools people, not rooms — the moving air makes skin feel cooler through evaporation. If you use air conditioning, the breeze lets you raise the thermostat by about 4 °F without losing comfort, which cuts cooling costs far more than the fan itself costs to run. At high speed this fan draws about 25.4 W, a small fraction of what a central or room air conditioner uses. Turn the fan off when you leave the room.
Smart and connected features
This model offers connected functionality over Bluetooth, Wi-Fi. Pair it with the manufacturer's app to set schedules, adjust speed from your phone and, where supported, link it to a voice assistant. Keep the wall switch that feeds the fan turned on, or the fan cannot respond to the app.
Care and maintenance
| When | What to do |
|---|---|
| Every month | Dust the blades with a microfiber cloth or a pillowcase slipped over each blade so dust falls inside it. Heavy dust adds weight and can cause wobble. |
| Every 6 months | With power off, check that the canopy, downrod set screws, blade screws and light-kit fasteners are tight. |
| Twice a year | Change the rotation direction for the season. |
| As needed | Replace remote-control batteries when the range drops. Wipe the motor housing with a dry or barely damp cloth — never spray liquid into the motor. |
| Every season | Clean outdoor fans more often; pollen, salt air and insects build up quickly. Check for corrosion on exposed hardware. |
Troubleshooting
Most ceiling fan problems are caused by loose hardware, wiring connections or an incompatible control. Turn off power at the breaker before checking anything inside the canopy or housing.
| Problem | Possible cause | What to try |
|---|---|---|
| Fan will not start | Breaker off; wall switch off; loose wire connection; remote not paired. | Check the breaker and switch; with power off, recheck connections in the canopy; re-pair the remote following the manual. |
| Fan wobbles | Loose blade or bracket screws; blades out of balance; mounting not secure. | Tighten all screws, confirm the box is fan-rated and secure, then use the balancing kit. |
| Clicking noise | Loose blade screws, light glass or canopy; downrod not seated. | Tighten fasteners and reseat the downrod ball in the bracket. |
| Humming noise | Incompatible wall control or dimmer; loose canopy. | Use only the control supplied or approved for the fan; tighten the canopy. |
| Remote does not work | Weak battery; receiver code mismatch; wall switch off. | Replace the battery, re-pair the remote, and leave the wall switch on. |
| Little airflow felt | Fan turning in winter (clockwise) direction; blades too close to the ceiling; fan too small for the room. | Switch to counterclockwise for summer and compare the room with the 44 in. blade span guidance. |
Energy use and running costs
Ceiling fan certification data lists power draw rather than an annual energy figure, so the table below estimates yearly use for the WAC F-036L- at an average electricity price of $0.17 per kWh. Adjust the hours to match how you use the fan.
| Scenario | Power | Energy per year | Cost per year |
|---|---|---|---|
| High speed, 8 h/day | 25.4 W | 74 kWh | $12.61 |
| Standby, 16 h/day | 1.4 W | 8.2 kWh | $1.39 |
Its airflow efficiency of 163 CFM/W is the ratio of air moved to power used under the DOE test procedure. A more efficient fan moves the same air for less electricity.
Frequently asked questions
What size room is the WAC F-036L- suitable for?
With a 44 in. blade span, it is best suited to rooms of roughly 144–225 sq. ft., such as a bedroom or kitchen. Very large or long rooms often work better with two fans.
How energy efficient is the WAC F-036L-?
It is rated at 163 cubic feet per minute of airflow per watt. Higher CFM/W means more air moved for each watt of electricity.
How many watts does the WAC F-036L- use?
About 25.4 W on high, plus 1.4 W in standby. Running on high for 8 hours a day costs about $12.61 a year at $0.17/kWh.
Can the WAC F-036L- be installed outdoors?
Yes. It is listed for indoor and outdoor use. Check the label to see whether it is rated for damp locations (covered areas) or wet locations (exposed to rain) before installing.
Does the WAC F-036L- have a light?
No. The certified configuration is a fan-only model without a light kit.
Is the WAC F-036L- a smart fan?
Yes. It has connected functionality over Bluetooth, Wi-Fi, so it can be controlled from the manufacturer's app.
What warranty does the WAC F-036L- have?
The ENERGY STAR listing reports a 5-year warranty on fan components. Confirm the full terms, including motor and light-kit coverage, with the manufacturer.
Sources and disclaimer
Specifications on this page come from the ENERGY STAR certified ceiling fans dataset published by the U.S. Environmental Protection Agency (record certified July 29, 2024), retrieved October 7, 2026.
The setup, operating, maintenance and troubleshooting guidance is written by ManualHarbor's editors for this specific product type and configuration. It is an independent guide — not a reproduction of the manufacturer's manual — and ManualHarbor is not affiliated with WAC. Always follow the safety instructions, installation requirements and warranty terms supplied with your unit, and contact WAC or an authorized service provider for warranty repairs and replacement parts.
Running-cost figures use assumed U.S. average utility prices and are estimates for comparison only. See our editorial methodology for details.
Report a problem with this guide
Spotted a wrong value, a broken link or something unclear? Tell us and we will review it.