ComputersAll-in-One Thin Client
LG 27CQ6***-** Computer Manual
Setup, everyday use, maintenance and troubleshooting for the all-in-one thin client, with verified specifications.
- ProcessorIntel Pentium N6005
- Memory8 GB
- Idle power20.5 W
- Est. yearly cost$12.56
About the LG 27CQ6***-**
The LG 27CQ6***-** is an all-in-one thin client certified under the ENERGY STAR program for computers.
The certified configuration includes an Intel Pentium N6005 processor (1 cores, up to 3.3 GHz), 8 GB of memory, and SSD storage, running Windows 10 IoT or IGEL OS. Retail configurations of the same model can differ, so check the system information on your unit.
Hardware listed in the certification record includes a Gigabit Ethernet port.
Its typical energy consumption (TEC) is 73.9 kWh per year, 5% below the ENERGY STAR limit of 77.6 kWh for its configuration. Measured idle power is 20.5 W, and sleep draws 1.3 W.
Specifications
| Brand | LG |
|---|---|
| Model number | 27CQ6***-** |
| Computer type | All-in-One Thin Client |
| Processor | Intel Pentium N6005 |
| CPU cores | 1 |
| Base clock speed | 2.0 GHz |
| Maximum clock speed | 3.3 GHz |
| Memory (as certified) | 8 GB |
| Storage type | SSD |
| Operating system | Windows 10 IoT or IGEL OS |
| Gigabit Ethernet ports | 1 |
| Energy Efficient Ethernet | No |
| Wake-on-LAN (as shipped) | Enabled on AC power only |
| Default low-power mode | Sleep |
| Sleep timer (as shipped) | 30 min |
| Display-off timer (as shipped) | 10 min |
| Short-idle power | 20.5 W |
| Long-idle power | 4.3 W |
| Sleep power | 1.3 W |
| Off power | 1.2 W |
| Typical energy consumption (TEC) | 73.9 kWh/yr |
| ENERGY STAR TEC limit | 77.6 kWh/yr |
| Below ENERGY STAR limit | 5% |
Safety information
- Connect the computer to a grounded outlet, preferably through a surge protector. Replace a damaged power cord before further use.
- Lift an all-in-one by the base and frame, not by the screen. Keep the stand on a stable surface so the unit cannot tip when the display is tilted.
- Keep liquids away from the keyboard and vents. If liquid is spilled, shut down immediately, unplug the power and let the computer dry completely before restarting.
Setup
- Unpack and inspect
Remove all packaging, protective film and cardboard inserts. Keep the box and receipt until you are sure the computer works correctly.
- Connect the display, keyboard and network
Connect the keyboard and mouse, then connect the Ethernet cable — thin clients depend on the network to reach the virtual desktop or terminal server.
- Configure the connection
Enter the connection broker or server address provided by your IT administrator, or let the management software provision the device automatically. Keep the thin client firmware current through the management console.
Using your computer
Sleep and power settings
As shipped, the LG 27CQ6***-** turns off its display after 10 minutes of inactivity and goes to sleep after 30 minutes. Keeping these timers short is the easiest way to save energy. Its default low-power state is conventional sleep, which keeps your session in memory at very low power and resumes in a few seconds. Measured sleep power is 1.3 W, compared with 20.5 W when idle with the screen on.
Performance
With 8 GB of memory, close unused apps and browser tabs to keep the system responsive. Solid-state storage needs no defragmenting; leave 10–20% of the drive free so it can maintain performance.
Networking
The computer has one Gigabit Ethernet port. Wake-on-LAN from sleep is enabled on ac power only as shipped; IT departments use it to wake computers remotely for overnight updates.
Care and maintenance
| When | What to do |
|---|---|
| Weekly | Restart the computer to apply pending updates and clear memory; confirm that backups completed. |
| Monthly | Install operating system and application updates. Wipe the screen, keyboard and mouse with a soft, slightly damp microfiber cloth (power off first). |
| Every 3–6 months | With the computer shut down and unplugged, clear dust from the front and rear vents. |
| Every 6–12 months | Check for BIOS/UEFI firmware updates from the manufacturer and review storage health and free space. |
Troubleshooting
Start with the simple checks below. For beep codes, diagnostic lights or error messages specific to this model, use the manufacturer's built-in diagnostics and support documentation.
| Problem | Possible cause | What to try |
|---|---|---|
| Will not turn on | Power cord or outlet; power strip switched off. | Check the outlet and power strip, reseat the power cord, then hold the power button for 15 seconds and try again. |
| Runs hot or the fan is loud | Dust-clogged vents; blocked airflow; heavy background task. | Clean the vents, keep 4 in. of clearance around the case, and check Task Manager for apps using a lot of power. |
| Slow performance | Too many background apps; storage nearly full; pending updates. | Close or disable unneeded startup items, free up storage space, install updates and restart. |
| Will not wake from sleep | Software or firmware issue; accessory preventing wake. | Press the power button briefly; update chipset, graphics and firmware; disconnect USB devices to test. |
| Wi-Fi drops or is slow | Weak signal; outdated software; router issue. | Move closer to the router, update the network driver, and restart the router. |
| Cannot reach the virtual desktop | Network cable or DHCP problem; wrong server address; expired credentials. | Check the Ethernet link light, confirm the server address with IT, and re-enter credentials. |
Energy use and running costs
The LG 27CQ6***-** has a typical energy consumption (TEC) of 73.9 kWh per year, about $12.56 a year at $0.17 per kWh. TEC combines the measured off, sleep and idle power with ENERGY STAR's standard assumptions about how many hours a year a desktop spends in each state. It does not include time under heavy load such as gaming, rendering or video export, which can draw several times the idle figure.
| Power state | Measured power |
|---|---|
| Short idle (on, screen on, nothing running) | 20.5 W |
| Long idle (display off) | 4.3 W |
| Sleep | 1.3 W |
| Off (plugged in) | 1.2 W |
Sleep settings matter: leaving the computer on and idle for the 16 hours a day you are not using it adds about 120 kWh ($20.35) a year, versus 7.59 kWh ($1.29) if it sleeps during those hours.
Frequently asked questions
What processor and memory does the LG 27CQ6***-** have?
The certified configuration has an Intel Pentium N6005 processor with 1 cores (up to 3.3 GHz) and 8 GB of RAM. Other retail configurations may differ.
How much electricity does the LG 27CQ6***-** use?
Its ENERGY STAR typical energy consumption is 73.9 kWh per year — about $12.56 at $0.17/kWh. It draws 20.5 W at idle and 1.3 W in sleep.
What operating system does the LG 27CQ6***-** run?
It was certified with Windows 10 IoT or IGEL OS.
Sources and disclaimer
Specifications on this page come from the ENERGY STAR certified computers dataset published by the U.S. Environmental Protection Agency (record certified August 31, 2025), retrieved October 7, 2026.
The setup, operating, maintenance and troubleshooting guidance is written by ManualHarbor's editors for this specific product type and configuration. It is an independent guide — not a reproduction of the manufacturer's manual — and ManualHarbor is not affiliated with LG. Always follow the safety instructions, installation requirements and warranty terms supplied with your unit, and contact LG or an authorized service provider for warranty repairs and replacement parts.
Running-cost figures use assumed U.S. average utility prices and are estimates for comparison only. See our editorial methodology for details.
Report a problem with this guide
Spotted a wrong value, a broken link or something unclear? Tell us and we will review it.