MonitorsComputer Monitor

HP HP 734pm Monitor Manual

Setup, everyday use, maintenance and troubleshooting for the 34.1 in. ultrawide QHD curved IPS-type monitor, with verified specifications.

  • Screen34.1 in.
  • ResolutionUWQHD ultrawide
  • On-mode power31.3 W
  • Est. yearly cost$17.13

About the HP HP 734pm

The HP HP 734pm is a 34.1 in. ultrawide QHD curved IPS-type monitor certified under the ENERGY STAR program for displays. Its native resolution is 3440 × 1440 pixels (UWQHD ultrawide), about 109 pixels per inch.

It uses an IPS LCD panel with a rated maximum luminance of 400 cd/m² (nits). It carries VESA DisplayHDR 400 certification. Listed signal and data interfaces include HDMI, DisplayPort, Thunderbolt, USB, and Ethernet (RJ45). A USB-C port with Power Delivery can charge a connected laptop at up to 65 W while carrying video and data. Other listed equipment includes built-in speakers, a camera interface, and automatic brightness control.

Measured on-mode power is 31.3 W, with 0.83 W in sleep and a total energy consumption (TEC) rating of 101 kWh per year — 10% below the ENERGY STAR limit for a display of this size and resolution.

Specifications

HP HP 734pm specifications
BrandHP
Model numberHP 734pm
Model name / seriesHP Series 7 Pro 734pm
Display typeComputer Monitor
Screen size (diagonal)34.1 in.
Screen area415 sq. in.
Panel technologyIPS LCD
Native resolution3440 × 1440
Resolution classUWQHD ultrawide
Pixel density109 ppi
Maximum luminance400 cd/m²
Rated contrast ratio2,000:1
HDR certificationDisplayHDR 400
Enhanced Performance DisplayYes
Signal and data interfacesHDMI, DisplayPort, Thunderbolt, USB, Ethernet (RJ45)
USB-C with Power DeliveryYes
Maximum USB-C charging power65 W
Built-in speakersYes
Curved screenYes
Automatic brightness controlYes
Power sourceInternal AC power supply
On-mode power31.3 W
Sleep-mode power0.83 W
Off-mode power0.22 W
Total energy consumption (TEC)100.8 kWh/yr
ENERGY STAR TEC limit111.8 kWh/yr
Below ENERGY STAR limit10%
ENERGY STAR Most EfficientNo

Safety information

  • Place the monitor on a stable, level surface. When using a monitor arm or wall mount, choose one rated for the monitor's weight and VESA pattern and tighten it as instructed.
  • Connect the display to a properly grounded outlet with the supplied power cord. Do not use a damaged cord, and do not route it under rugs or through doorways.
  • Keep the ventilation openings clear and do not place the display near radiators, heaters or in direct sunlight.
  • Do not expose the display to rain, moisture or spilled liquids. If liquid gets inside, unplug it immediately and have it checked before further use.
  • Unplug the display during lightning storms or when it will be unused for an extended period.
  • Keep fingers clear of the hinge and height-adjustment mechanism when tilting, pivoting or raising the screen.

Setup

Position the 34.1 in. screen about 30–40 in. (75–100 cm) from your eyes, directly in front of you, with the top line of text at or slightly below eye level. Tilt it back 10–20° and place it at a right angle to windows to minimize glare. For a curved screen, sit near the center of the curve so the edges are equally distant.

  1. Assemble the stand

    Attach the stand or monitor arm while the display is lying face-down on the protective packaging or a soft cloth. Do not press on the screen.

  2. Connect the video cable

    USB-C is the simplest option with a laptop: one cable carries video, USB data and up to 65 W charging power. If your laptop's own charger is rated higher than 65 W, it may charge slowly under heavy load — keep its adapter handy. DisplayPort is generally the best choice for high refresh rates from a desktop graphics card. HDMI works with most laptops, desktops and game consoles. The Thunderbolt connection can carry video, data and daisy-chained devices from compatible computers.

  3. Set resolution and scaling

    In your operating system's display settings, select the native resolution of 3440 × 1440. At about 109 pixels per inch, a scaling setting around 100% usually gives comfortably sized text; adjust to taste.

  4. Adjust brightness

    Set brightness so a white page looks similar to a sheet of paper under your room lighting — typically 100–150 cd/m² for office work, well below this model's 400 cd/m² maximum. Lower brightness reduces both eye strain and power use.

Using your monitor

Picture modes and color

Use the on-screen display (OSD) menu to choose a picture preset. A standard or sRGB mode is best for office work and web browsing. Avoid "dynamic" contrast modes for photo editing, as they shift brightness with screen content.

Using HDR

DisplayHDR 400 certification means the display has been tested by VESA for HDR performance, including a peak brightness of at least 400 cd/m² on HDR highlights. Turn on HDR in your operating system or game only when watching or playing HDR content; for everyday desktop work SDR mode usually looks more natural and uses less power.

Power management

The monitor enters sleep automatically when the computer stops sending a signal, dropping to 0.83 W. Set your computer to turn off the display after 5–15 minutes of inactivity so this happens during breaks. With the power button off, the monitor draws 0.22 W. Automatic brightness control is available; it lowers brightness when the room is dim.

USB-C charging and docking

With a USB-C laptop connected, the monitor supplies up to 65 W through the same cable that carries the picture. Many monitors keep the USB-C port powered in sleep so the laptop continues to charge; check the OSD for a "USB charging in standby" option if you want to disable it.

Speakers and camera

Select the monitor as the audio output device in your computer's sound settings; audio is carried over HDMI, DisplayPort, or USB-C along with the picture. The camera interface requires the monitor's USB upstream (or USB-C) connection to the computer.

Features

USB-C Power Delivery
Single-cable video, data and laptop charging (up to 65 W).
Automatic brightness control
Adjusts screen brightness to ambient light, saving energy in dim rooms.
Adjustable backlight
Separate control of light output, the main factor in power draw.
Built-in speakers
Plays audio from the connected computer or media player without external speakers.
Camera interface
Supports a built-in or attachable camera for video calls.
Enhanced Performance Display
ENERGY STAR designation for displays with high contrast and a wide color gamut, which receive a higher power allowance.

Care and maintenance

WhenWhat to do
WeeklyDust the screen with a dry microfiber cloth using light pressure.
When smudgedPower the display off, then wipe with a microfiber cloth lightly dampened with water. Never spray liquid directly on the screen or use ammonia- or alcohol-based glass cleaners on anti-glare coatings.
Every 3 monthsVacuum or brush dust from the ventilation slots and check that cables are fully seated and not pulling on the ports.
Every 6 monthsCheck the manufacturer's support site for firmware updates, especially if you see compatibility issues with new computers or docks.

Troubleshooting

Most display problems trace back to cables, input selection or computer settings. Work through these checks before contacting support; for model-specific messages, consult the manufacturer's manual.

ProblemPossible causeWhat to try
"No signal" messageWrong input selected; loose cable; computer asleep or outputting to another screen.Select the correct input in the OSD, reseat both cable ends, wake the computer, and press Win+P (Windows) or check Displays settings (macOS).
Text looks blurry or the picture does not fill the screenComputer not sending the native resolution; scaling or overscan settings.Set the resolution to 3440 × 1440 and adjust OS scaling instead; turn off overscan or "aspect" options in the OSD.
Flicker, dropouts or black screen at high refresh ratesCable not rated for the bandwidth; adapter or dock limitation.Use a certified DisplayPort or Ultra/Premium High Speed HDMI cable, connect directly without adapters, or lower the refresh rate to test.
Colors look washed out over HDMILimited RGB range sent by the computer or console.Set the output to full RGB range in the graphics driver, or match the monitor's HDMI range setting.
Monitor does not wake from sleepDeep-sleep option on the input; graphics driver issue.Press a monitor button or reselect the input; disable deep sleep / auto-input in the OSD; update the graphics driver.
Laptop not charging over USB-CLaptop needs more power than the port supplies; cable not rated for charging; USB-C port on laptop is data-only.Check that the laptop accepts USB-C charging and needs no more than 65 W; use the supplied or a 5 A certified cable; try another USB-C port on the laptop.
No sound from the speakersComputer outputting audio elsewhere; monitor volume muted.Select the monitor as the audio output device and raise the monitor's volume in the OSD.

Energy use and running costs

The HP HP 734pm has a total energy consumption (TEC) rating of 101 kWh per year. ENERGY STAR's TEC method assumes the screen is on about 35% of the time (roughly 8.4 hours a day) and asleep the rest. At $0.17 per kWh, it costs about $17.13 per year.

Estimated from 31.3 W on and 0.83 W sleep at $0.17/kWh, 365 days a year.
Daily useEnergy per yearCost per year
4 hours on, 20 asleep51.8 kWh$8.81
8 hours on, 16 asleep96.3 kWh$16.38
12 hours on, 12 asleep141 kWh$23.95

On-mode power is measured at the factory-default brightness. Turning brightness up, using HDR, or charging a laptop through USB-C increases consumption; enabling automatic brightness control and using short sleep timers reduces it.

Frequently asked questions

What size and resolution is the HP HP 734pm?

It has a 34.1 in. screen with a native resolution of 3440 × 1440 (UWQHD ultrawide), giving a pixel density of about 109 ppi.

How much power does the HP HP 734pm use?

It draws 31.3 W when on and 0.83 W in sleep. Its ENERGY STAR TEC rating is about 101 kWh a year, or $17.13 at $0.17/kWh.

Can the HP HP 734pm charge a laptop over USB-C?

Yes. It has a USB-C port with Power Delivery rated at up to 65 W, so a compatible laptop can charge, send video and use the monitor's USB ports over one cable.

What inputs does the HP HP 734pm have?

The ENERGY STAR record lists HDMI, DisplayPort, Thunderbolt, USB, and Ethernet (RJ45). Port counts and versions (for example HDMI 2.1 or DisplayPort 1.4) are not included in the certification data; check the manufacturer's specifications.

What panel type does the HP HP 734pm use?

It uses an IPS LCD panel with a rated maximum luminance of 400 cd/m². IPS-type panels offer wide viewing angles and consistent color.

Does the HP HP 734pm support HDR?

Yes. It is certified to VESA DisplayHDR 400.

Sources and disclaimer

Specifications on this page come from the ENERGY STAR certified monitors dataset published by the U.S. Environmental Protection Agency (record certified January 2, 2024), retrieved October 7, 2026.

The setup, operating, maintenance and troubleshooting guidance is written by ManualHarbor's editors for this specific product type and configuration. It is an independent guide — not a reproduction of the manufacturer's manual — and ManualHarbor is not affiliated with HP. Always follow the safety instructions, installation requirements and warranty terms supplied with your unit, and contact HP or an authorized service provider for warranty repairs and replacement parts.

Running-cost figures use assumed U.S. average utility prices and are estimates for comparison only. See our editorial methodology for details.