MonitorsComputer Monitor
HP HP E14 G4 Monitor Manual
Setup, everyday use, maintenance and troubleshooting for the 14 in. Full HD portable monitor, with verified specifications.
- Screen14 in.
- ResolutionFull HD 1080p
- On-mode power3.8 W
- Est. yearly cost$2.17
About the HP HP E14 G4
HP model HP E14 G4 is a 14 in. Full HD portable monitor that meets ENERGY STAR display efficiency requirements. Its native resolution is 1920 × 1080 pixels (Full HD 1080p), about 157 pixels per inch.
It uses a TFT LCD panel with a rated maximum luminance of 200 cd/m² (nits). Listed signal and data interfaces include USB. USB-C Power Delivery is listed (up to 65 W); on a bus-powered portable monitor this typically allows a USB-C adapter connected to the monitor to pass power through to the laptop.
Measured on-mode power is 3.8 W, with 0.2 W in sleep and a total energy consumption (TEC) rating of 12.8 kWh per year — 52% below the ENERGY STAR limit for a display of this size and resolution. That TEC rating is lower than 100% of the 1,472 Computer Monitor models in our database.
Specifications
| Brand | HP |
|---|---|
| Model number | HP E14 G4 |
| Model name / series | HP E14 G4 Portable Monitor |
| Display type | Computer Monitor |
| Screen size (diagonal) | 14.0 in. |
| Screen area | 83.4 sq. in. |
| Panel technology | TFT LCD |
| Native resolution | 1920 × 1080 |
| Resolution class | Full HD 1080p |
| Pixel density | 157 ppi |
| Maximum luminance | 200 cd/m² |
| Rated contrast ratio | 800:1 |
| Color spaces supported | NTSC |
| Enhanced Performance Display | No |
| Signal and data interfaces | USB |
| USB-C with Power Delivery | Yes |
| Maximum USB-C charging power | 65 W |
| Power source | USB bus power |
| On-mode power | 3.8 W |
| Sleep-mode power | 0.20 W |
| Off-mode power | 0.20 W |
| Total energy consumption (TEC) | 12.8 kWh/yr |
| ENERGY STAR TEC limit | 26.9 kWh/yr |
| Below ENERGY STAR limit | 52% |
| ENERGY STAR Most Efficient | Yes |
Safety information
- Place the monitor on a stable, level surface. When using a monitor arm or wall mount, choose one rated for the monitor's weight and VESA pattern and tighten it as instructed.
- Connect the display to a properly grounded outlet with the supplied power cord. Do not use a damaged cord, and do not route it under rugs or through doorways.
- Keep the ventilation openings clear and do not place the display near radiators, heaters or in direct sunlight.
- Do not expose the display to rain, moisture or spilled liquids. If liquid gets inside, unplug it immediately and have it checked before further use.
- Unplug the display during lightning storms or when it will be unused for an extended period.
- Keep fingers clear of the hinge and height-adjustment mechanism when tilting, pivoting or raising the screen.
Setup
Position the 14 in. screen about 20–30 in. (50–75 cm) from your eyes, directly in front of you, with the top line of text at or slightly below eye level. Tilt it back 10–20° and place it at a right angle to windows to minimize glare.
- Unfold the stand
Open the folding cover or kickstand and stand the monitor on a flat surface next to your laptop. Do not rest it on soft surfaces that block airflow.
- Power and connect
This model is powered over USB. Connect it to a laptop USB-C port that supports video output (DisplayPort Alternate Mode); if the laptop cannot supply enough power, connect a USB-C power adapter to the monitor's second USB-C port where provided.
- Set resolution and scaling
In your operating system's display settings, select the native resolution of 1920 × 1080. At about 157 pixels per inch, a scaling setting around 150% usually gives comfortably sized text; adjust to taste.
- Adjust brightness
Set brightness so a white page looks similar to a sheet of paper under your room lighting — typically 100–150 cd/m² for office work, well below this model's 200 cd/m² maximum. Lower brightness reduces both eye strain and power use.
Using your monitor
Picture modes and color
Use the on-screen display (OSD) menu to choose a picture preset. The certification record lists NTSC color space support; use the matching mode (for example sRGB for web and office work) when color accuracy matters. Avoid "dynamic" contrast modes for photo editing, as they shift brightness with screen content.
Power management
The monitor enters sleep automatically when the computer stops sending a signal, dropping to 0.2 W. Set your computer to turn off the display after 5–15 minutes of inactivity so this happens during breaks. With the power button off, the monitor draws 0.2 W.
USB-C charging and docking
With a USB-C laptop connected, the monitor supplies up to 65 W through the same cable that carries the picture. Many monitors keep the USB-C port powered in sleep so the laptop continues to charge; check the OSD for a "USB charging in standby" option if you want to disable it.
Features
- USB-C Power Delivery
- Single-cable video, data and laptop charging (up to 65 W).
Care and maintenance
| When | What to do |
|---|---|
| Weekly | Dust the screen with a dry microfiber cloth using light pressure. |
| When smudged | Power the display off, then wipe with a microfiber cloth lightly dampened with water. Never spray liquid directly on the screen or use ammonia- or alcohol-based glass cleaners on anti-glare coatings. |
| Every 3 months | Vacuum or brush dust from the ventilation slots and check that cables are fully seated and not pulling on the ports. |
| Every 6 months | Check the manufacturer's support site for firmware updates, especially if you see compatibility issues with new computers or docks. |
Troubleshooting
Most display problems trace back to cables, input selection or computer settings. Work through these checks before contacting support; for model-specific messages, consult the manufacturer's manual.
| Problem | Possible cause | What to try |
|---|---|---|
| "No signal" message | Wrong input selected; loose cable; computer asleep or outputting to another screen. | Select the correct input in the OSD, reseat both cable ends, wake the computer, and press Win+P (Windows) or check Displays settings (macOS). |
| Text looks blurry or the picture does not fill the screen | Computer not sending the native resolution; scaling or overscan settings. | Set the resolution to 1920 × 1080 and adjust OS scaling instead; turn off overscan or "aspect" options in the OSD. |
| Flicker, dropouts or black screen at high refresh rates | Cable not rated for the bandwidth; adapter or dock limitation. | Use a certified DisplayPort or Ultra/Premium High Speed HDMI cable, connect directly without adapters, or lower the refresh rate to test. |
| Colors look washed out over HDMI | Limited RGB range sent by the computer or console. | Set the output to full RGB range in the graphics driver, or match the monitor's HDMI range setting. |
| Monitor does not wake from sleep | Deep-sleep option on the input; graphics driver issue. | Press a monitor button or reselect the input; disable deep sleep / auto-input in the OSD; update the graphics driver. |
| Laptop not charging over USB-C | Laptop needs more power than the port supplies; cable not rated for charging; USB-C port on laptop is data-only. | Check that the laptop accepts USB-C charging and needs no more than 65 W; use the supplied or a 5 A certified cable; try another USB-C port on the laptop. |
Energy use and running costs
The HP HP E14 G4 has a total energy consumption (TEC) rating of 12.8 kWh per year. ENERGY STAR's TEC method assumes the screen is on about 35% of the time (roughly 8.4 hours a day) and asleep the rest. At $0.17 per kWh, it costs about $2.17 per year.
| Daily use | Energy per year | Cost per year |
|---|---|---|
| 4 hours on, 20 asleep | 7.01 kWh | $1.19 |
| 8 hours on, 16 asleep | 12.3 kWh | $2.08 |
| 12 hours on, 12 asleep | 17.5 kWh | $2.98 |
On-mode power is measured at the factory-default brightness. Turning brightness up or charging a laptop through USB-C increases consumption; using short sleep timers reduces it.
Frequently asked questions
What size and resolution is the HP HP E14 G4?
It has a 14 in. screen with a native resolution of 1920 × 1080 (Full HD 1080p), giving a pixel density of about 157 ppi.
How much power does the HP HP E14 G4 use?
It draws 3.8 W when on and 0.2 W in sleep. Its ENERGY STAR TEC rating is about 12.8 kWh a year, or $2.17 at $0.17/kWh.
Can the HP HP E14 G4 charge a laptop over USB-C?
Yes. It has a USB-C port with Power Delivery rated at up to 65 W, so a compatible laptop can charge, send video and use the monitor's USB ports over one cable.
What inputs does the HP HP E14 G4 have?
The ENERGY STAR record lists USB. Port counts and versions (for example HDMI 2.1 or DisplayPort 1.4) are not included in the certification data; check the manufacturer's specifications.
What panel type does the HP HP E14 G4 use?
It uses a TFT LCD panel with a rated maximum luminance of 200 cd/m².
Sources and disclaimer
Specifications on this page come from the ENERGY STAR certified monitors dataset published by the U.S. Environmental Protection Agency (record certified July 28, 2020), retrieved October 7, 2026.
The setup, operating, maintenance and troubleshooting guidance is written by ManualHarbor's editors for this specific product type and configuration. It is an independent guide — not a reproduction of the manufacturer's manual — and ManualHarbor is not affiliated with HP. Always follow the safety instructions, installation requirements and warranty terms supplied with your unit, and contact HP or an authorized service provider for warranty repairs and replacement parts.
Running-cost figures use assumed U.S. average utility prices and are estimates for comparison only. See our editorial methodology for details.
Report a problem with this guide
Spotted a wrong value, a broken link or something unclear? Tell us and we will review it.