MonitorsSignage Display
LG 32TNF5P- Monitor Manual
Setup, everyday use, maintenance and troubleshooting for the 31.6 in. Full HD signage display, with verified specifications.
- Screen31.6 in.
- ResolutionFull HD 1080p
- On-mode power45.4 W
- Est. yearly cost$33.99
About the LG 32TNF5P-
The LG 32TNF5P- is a 31.6 in. Full HD signage display certified under the ENERGY STAR program for displays. Its native resolution is 1920 × 1080 pixels (Full HD 1080p), about 70 pixels per inch.
It uses an IPS LCD panel with a rated maximum luminance of 500 cd/m² (nits). Listed signal and data interfaces include HDMI.
Measured on-mode power is 45.4 W, with 0.26 W in sleep — 9% below the ENERGY STAR limit for a display of this size and resolution. That power draw is lower than 96% of the 1,270 Signage Display models in our database.
Specifications
| Brand | LG |
|---|---|
| Model number | 32TNF5P-# |
| Display type | Signage Display |
| Screen size (diagonal) | 31.6 in. |
| Screen area | 425 sq. in. |
| Panel technology | IPS LCD |
| Native resolution | 1920 × 1080 |
| Resolution class | Full HD 1080p |
| Pixel density | 70 ppi |
| Maximum luminance | 500 cd/m² |
| Rated contrast ratio | 1,000:1 |
| Color spaces supported | NTSC |
| Enhanced Performance Display | No |
| Signal and data interfaces | HDMI |
| USB-C with Power Delivery | No |
| Full network connectivity | Yes |
| Power source | Internal AC power supply |
| On-mode power | 45.4 W |
| ENERGY STAR on-mode limit | 49.8 W |
| Sleep-mode power | 0.26 W |
| Below ENERGY STAR limit | 9% |
| ENERGY STAR Most Efficient | No |
Safety information
- Wall, ceiling and video-wall installations must be done by a qualified installer using a mount rated for the display's weight and attached to structural framing or masonry.
- Connect the display to a properly grounded outlet with the supplied power cord. Do not use a damaged cord, and do not route it under rugs or through doorways.
- Keep the ventilation openings clear and do not place the display near radiators, heaters or in direct sunlight.
- Do not expose the display to rain, moisture or spilled liquids. If liquid gets inside, unplug it immediately and have it checked before further use.
- Unplug the display during lightning storms or when it will be unused for an extended period.
Setup
Plan the installation before mounting: confirm wall structure, power and data cabling locations, and the viewing distance for the content. For a 31.6 in. screen, text intended to be read should be sized for viewers standing roughly 4–11 ft away.
- Mount the display
Attach a VESA-compliant wall, ceiling or floor mount rated for the display's weight. If you plan to run it in portrait orientation, check that the manufacturer permits it and rotate the display in the direction specified so internal heat is vented correctly.
- Connect power and signal
Connect the power cord to a dedicated outlet or surge-protected circuit. Connect the media player or PC to HDMI.
- Connect to the network
Join the display to your network so it can receive content updates and be monitored remotely. Assign a static IP address or DHCP reservation for easier management.
- Configure schedules and power settings
Set the on/off schedule to match business hours, and enable the no-signal standby setting.
Using your display
Brightness for the environment
This display is rated for up to 500 cd/m². Indoor signage in normally lit spaces typically runs at 300–500 cd/m²; screens facing windows or in very bright lobbies need considerably more. Running at maximum brightness in a dim space wastes energy and shortens backlight life.
Schedules and power states
Program on/off times or use your content-management system to put the display into sleep outside opening hours. In sleep it draws 0.26 W, compared with 45.4 W when on. Because full network connectivity is listed, the display can stay reachable on the network while in a low-power state.
Care and maintenance
| When | What to do |
|---|---|
| Weekly | Dust the screen with a dry microfiber cloth using light pressure. |
| When smudged | Power the display off, then wipe with a microfiber cloth lightly dampened with water. Never spray liquid directly on the screen or use ammonia- or alcohol-based glass cleaners on anti-glare coatings. |
| Every 3 months | Vacuum or brush dust from the ventilation slots and check that cables are fully seated and not pulling on the ports. |
| Every 6 months | Check the manufacturer's support site for firmware updates, especially if you see compatibility issues with new computers or docks. |
| Every year | Inspect the mount, fasteners and cable strain relief; confirm the schedule and clock settings after daylight-saving changes or power outages. |
Troubleshooting
Most display problems trace back to cables, input selection or computer settings. Work through these checks before contacting support; for model-specific messages, consult the manufacturer's manual.
| Problem | Possible cause | What to try |
|---|---|---|
| "No signal" message | Wrong input selected; loose cable; computer asleep or outputting to another screen. | Select the correct input in the OSD, reseat both cable ends, wake the computer, and press Win+P (Windows) or check Displays settings (macOS). |
| Text looks blurry or the picture does not fill the screen | Computer not sending the native resolution; scaling or overscan settings. | Set the resolution to 1920 × 1080 and adjust OS scaling instead; turn off overscan or "aspect" options in the OSD. |
| Flicker, dropouts or black screen at high refresh rates | Cable not rated for the bandwidth; adapter or dock limitation. | Use a certified DisplayPort or Ultra/Premium High Speed HDMI cable, connect directly without adapters, or lower the refresh rate to test. |
| Colors look washed out over HDMI | Limited RGB range sent by the computer or console. | Set the output to full RGB range in the graphics driver, or match the monitor's HDMI range setting. |
| Monitor does not wake from sleep | Deep-sleep option on the input; graphics driver issue. | Press a monitor button or reselect the input; disable deep sleep / auto-input in the OSD; update the graphics driver. |
| Display turns off or on unexpectedly | On/off schedule, no-signal timer or remote-management command. | Review schedules in the display menu and content-management system, and confirm the clock and time zone. |
Energy use and running costs
Signage displays often run long hours. With 45.4 W on-mode power and 0.26 W in sleep, running the LG 32TNF5P- 12 hours a day and sleeping the other 12 uses about 200 kWh per year, or $33.99 at $0.17 per kWh.
| Operating schedule | Energy per year | Cost per year |
|---|---|---|
| 8 hours a day | 134 kWh | $22.79 |
| 12 hours a day | 200 kWh | $33.99 |
| 18 hours a day | 299 kWh | $50.79 |
| 24/7 | 398 kWh | $67.59 |
On-mode power is measured at the factory-default brightness. Turning brightness up increases consumption; using short sleep timers reduces it.
Frequently asked questions
What size and resolution is the LG 32TNF5P-?
It has a 31.6 in. screen with a native resolution of 1920 × 1080 (Full HD 1080p), giving a pixel density of about 70 ppi.
How much power does the LG 32TNF5P- use?
It draws 45.4 W when on and 0.26 W in sleep. Running 12 hours a day works out to about 200 kWh a year, or $33.99 at $0.17/kWh.
What inputs does the LG 32TNF5P- have?
The ENERGY STAR record lists HDMI. Port counts and versions (for example HDMI 2.1 or DisplayPort 1.4) are not included in the certification data; check the manufacturer's specifications.
What panel type does the LG 32TNF5P- use?
It uses an IPS LCD panel with a rated maximum luminance of 500 cd/m². IPS-type panels offer wide viewing angles and consistent color.
Sources and disclaimer
Specifications on this page come from the ENERGY STAR certified monitors dataset published by the U.S. Environmental Protection Agency (record certified December 3, 2023), retrieved October 7, 2026.
The setup, operating, maintenance and troubleshooting guidance is written by ManualHarbor's editors for this specific product type and configuration. It is an independent guide — not a reproduction of the manufacturer's manual — and ManualHarbor is not affiliated with LG. Always follow the safety instructions, installation requirements and warranty terms supplied with your unit, and contact LG or an authorized service provider for warranty repairs and replacement parts.
Running-cost figures use assumed U.S. average utility prices and are estimates for comparison only. See our editorial methodology for details.
Report a problem with this guide
Spotted a wrong value, a broken link or something unclear? Tell us and we will review it.