MonitorsComputer Monitor
Philips 245S1 Monitor Manual
Setup, everyday use, maintenance and troubleshooting for the 23.8 in. QHD monitor, with verified specifications.
- Screen23.8 in.
- ResolutionQHD 1440p
- On-mode power15.4 W
- Est. yearly cost$8.20
About the Philips 245S1
Philips model 245S1 is a 23.8 in. QHD monitor that meets ENERGY STAR display efficiency requirements. Its native resolution is 2560 × 1440 pixels (QHD 1440p), about 123 pixels per inch.
It uses a TFT LCD panel with a rated maximum luminance of 250 cd/m² (nits). Listed signal and data interfaces include HDMI, DisplayPort, and DVI. Other listed equipment includes built-in speakers.
Measured on-mode power is 15.4 W, with 0.2 W in sleep and a total energy consumption (TEC) rating of 48.3 kWh per year — 7% below the ENERGY STAR limit for a display of this size and resolution. That TEC rating is lower than 43% of the 1,472 Computer Monitor models in our database.
Specifications
| Brand | Philips |
|---|---|
| Model number | 245S1 |
| Model name / series | 245S1AE |
| Display type | Computer Monitor |
| Screen size (diagonal) | 23.8 in. |
| Screen area | 242 sq. in. |
| Panel technology | TFT LCD |
| Native resolution | 2560 × 1440 |
| Resolution class | QHD 1440p |
| Pixel density | 123 ppi |
| Maximum luminance | 250 cd/m² |
| Rated contrast ratio | 1,000:1 |
| Color spaces supported | sRGB |
| Enhanced Performance Display | No |
| Signal and data interfaces | HDMI, DisplayPort, DVI |
| USB-C with Power Delivery | No |
| Built-in speakers | Yes |
| Power source | Internal AC power supply |
| On-mode power | 15.4 W |
| Sleep-mode power | 0.20 W |
| Off-mode power | 0.19 W |
| Total energy consumption (TEC) | 48.3 kWh/yr |
| ENERGY STAR TEC limit | 52.2 kWh/yr |
| Below ENERGY STAR limit | 7% |
| ENERGY STAR Most Efficient | No |
Safety information
- Place the monitor on a stable, level surface. When using a monitor arm or wall mount, choose one rated for the monitor's weight and VESA pattern and tighten it as instructed.
- Connect the display to a properly grounded outlet with the supplied power cord. Do not use a damaged cord, and do not route it under rugs or through doorways.
- Keep the ventilation openings clear and do not place the display near radiators, heaters or in direct sunlight.
- Do not expose the display to rain, moisture or spilled liquids. If liquid gets inside, unplug it immediately and have it checked before further use.
- Unplug the display during lightning storms or when it will be unused for an extended period.
- Keep fingers clear of the hinge and height-adjustment mechanism when tilting, pivoting or raising the screen.
Setup
Position the 23.8 in. screen about 20–30 in. (50–75 cm) from your eyes, directly in front of you, with the top line of text at or slightly below eye level. Tilt it back 10–20° and place it at a right angle to windows to minimize glare.
- Assemble the stand
Attach the stand or monitor arm while the display is lying face-down on the protective packaging or a soft cloth. Do not press on the screen.
- Connect the video cable
DisplayPort is generally the best choice for high refresh rates from a desktop graphics card. HDMI works with most laptops, desktops and game consoles. DVI is provided for older computers; use a digital input whenever possible for the sharpest picture.
- Set resolution and scaling
In your operating system's display settings, select the native resolution of 2560 × 1440. At about 123 pixels per inch, a scaling setting around 125% usually gives comfortably sized text; adjust to taste.
- Adjust brightness
Set brightness so a white page looks similar to a sheet of paper under your room lighting — typically 100–150 cd/m² for office work, well below this model's 250 cd/m² maximum. Lower brightness reduces both eye strain and power use.
Using your monitor
Picture modes and color
Use the on-screen display (OSD) menu to choose a picture preset. The certification record lists sRGB color space support; use the matching mode (for example sRGB for web and office work) when color accuracy matters. Avoid "dynamic" contrast modes for photo editing, as they shift brightness with screen content.
Power management
The monitor enters sleep automatically when the computer stops sending a signal, dropping to 0.2 W. Set your computer to turn off the display after 5–15 minutes of inactivity so this happens during breaks. With the power button off, the monitor draws 0.19 W.
Built-in speakers
Select the monitor as the audio output device in your computer's sound settings; audio is carried over HDMI or DisplayPort along with the picture.
Features
- Built-in speakers
- Plays audio from the connected computer or media player without external speakers.
Care and maintenance
| When | What to do |
|---|---|
| Weekly | Dust the screen with a dry microfiber cloth using light pressure. |
| When smudged | Power the display off, then wipe with a microfiber cloth lightly dampened with water. Never spray liquid directly on the screen or use ammonia- or alcohol-based glass cleaners on anti-glare coatings. |
| Every 3 months | Vacuum or brush dust from the ventilation slots and check that cables are fully seated and not pulling on the ports. |
| Every 6 months | Check the manufacturer's support site for firmware updates, especially if you see compatibility issues with new computers or docks. |
Troubleshooting
Most display problems trace back to cables, input selection or computer settings. Work through these checks before contacting support; for model-specific messages, consult the manufacturer's manual.
| Problem | Possible cause | What to try |
|---|---|---|
| "No signal" message | Wrong input selected; loose cable; computer asleep or outputting to another screen. | Select the correct input in the OSD, reseat both cable ends, wake the computer, and press Win+P (Windows) or check Displays settings (macOS). |
| Text looks blurry or the picture does not fill the screen | Computer not sending the native resolution; scaling or overscan settings. | Set the resolution to 2560 × 1440 and adjust OS scaling instead; turn off overscan or "aspect" options in the OSD. |
| Flicker, dropouts or black screen at high refresh rates | Cable not rated for the bandwidth; adapter or dock limitation. | Use a certified DisplayPort or Ultra/Premium High Speed HDMI cable, connect directly without adapters, or lower the refresh rate to test. |
| Colors look washed out over HDMI | Limited RGB range sent by the computer or console. | Set the output to full RGB range in the graphics driver, or match the monitor's HDMI range setting. |
| Monitor does not wake from sleep | Deep-sleep option on the input; graphics driver issue. | Press a monitor button or reselect the input; disable deep sleep / auto-input in the OSD; update the graphics driver. |
| No sound from the speakers | Computer outputting audio elsewhere; monitor volume muted. | Select the monitor as the audio output device and raise the monitor's volume in the OSD. |
Energy use and running costs
The Philips 245S1 has a total energy consumption (TEC) rating of 48.3 kWh per year. ENERGY STAR's TEC method assumes the screen is on about 35% of the time (roughly 8.4 hours a day) and asleep the rest. At $0.17 per kWh, it costs about $8.20 per year.
| Daily use | Energy per year | Cost per year |
|---|---|---|
| 4 hours on, 20 asleep | 23.9 kWh | $4.06 |
| 8 hours on, 16 asleep | 46 kWh | $7.83 |
| 12 hours on, 12 asleep | 68.2 kWh | $11.59 |
On-mode power is measured at the factory-default brightness. Turning brightness up increases consumption; using short sleep timers reduces it.
Frequently asked questions
What size and resolution is the Philips 245S1?
It has a 23.8 in. screen with a native resolution of 2560 × 1440 (QHD 1440p), giving a pixel density of about 123 ppi.
How much power does the Philips 245S1 use?
It draws 15.4 W when on and 0.2 W in sleep. Its ENERGY STAR TEC rating is about 48.3 kWh a year, or $8.20 at $0.17/kWh.
Can the Philips 245S1 charge a laptop over USB-C?
No. The certification record does not list USB-C Power Delivery for this model; its listed interfaces are HDMI, DisplayPort, and DVI.
What inputs does the Philips 245S1 have?
The ENERGY STAR record lists HDMI, DisplayPort, and DVI. Port counts and versions (for example HDMI 2.1 or DisplayPort 1.4) are not included in the certification data; check the manufacturer's specifications.
What panel type does the Philips 245S1 use?
It uses a TFT LCD panel with a rated maximum luminance of 250 cd/m².
Sources and disclaimer
Specifications on this page come from the ENERGY STAR certified monitors dataset published by the U.S. Environmental Protection Agency (record certified May 9, 2021), retrieved October 7, 2026.
The setup, operating, maintenance and troubleshooting guidance is written by ManualHarbor's editors for this specific product type and configuration. It is an independent guide — not a reproduction of the manufacturer's manual — and ManualHarbor is not affiliated with Philips. Always follow the safety instructions, installation requirements and warranty terms supplied with your unit, and contact Philips or an authorized service provider for warranty repairs and replacement parts.
Running-cost figures use assumed U.S. average utility prices and are estimates for comparison only. See our editorial methodology for details.
Report a problem with this guide
Spotted a wrong value, a broken link or something unclear? Tell us and we will review it.