PrintersScanner
Kodak S2085f Printer Manual
Setup, everyday use, maintenance and troubleshooting for the 170 ipm scanner, with verified specifications.
- TypeScanner
- Speed170 ipm
- Duplex scanningYes
About the Kodak S2085f
This guide covers the Kodak S2085f, a 170 ipm scanner listed as ENERGY STAR certified. The manufacturer markets it as the Kodak S2085f Scanner.
It scans at a rated 170 images per minute (ipm) and supports two-sided scanning.
Specifications
| Brand | Kodak |
|---|---|
| Model number | S2085f |
| Model name / series | Kodak S2085f Scanner |
| Product type | Scanner |
| ENERGY STAR product category | Scanners |
| Media size format | Standard |
| Rated monochrome speed | 170 ipm |
| Automatic duplex (two-sided) | Yes |
| Professional imaging product | No |
| Default delay to sleep | 45 min |
Safety information
- Plug the scanner directly into a grounded wall outlet. Avoid light-duty extension cords, and replace a damaged power cord before use.
- Keep the ventilation openings clear and leave the clearance around the unit that the manual specifies for paper trays, covers and service access.
- Switch off and unplug the unit before cleaning it or reaching deep inside to clear a jam.
- Do not place heavy objects on the scanner glass, and keep long hair, loose clothing and fingers away from the document feeder rollers while scanning.
Setup
- Unpack and remove shipping materials
Remove all tape, foam and protective film, including pieces inside the covers and paper trays. If the scanner has a carriage lock, release it before connecting power.
- Choose a location
Place the unit on a sturdy, level surface (or its floor stand) away from direct sunlight, heating vents and humid areas. Leave room to open covers and pull out trays.
- Connect to your computer or network
Connect the unit to your network (Ethernet or Wi-Fi where available) or directly by USB, following the setup guide. Network connection lets several users share it and makes firmware updates easier.
- Install drivers and software
Install the manufacturer's scanning software and TWAIN/WIA or ICA driver from the support site, or use the operating system's built-in scanning if the model supports it.
- Check the sleep timer
The unit is shipped to enter sleep 45 minutes after the last job. Keep this setting (or shorten it) to minimize idle energy use.
Using your scanner
Scanning tips
- Scan text documents at 300 dpi for readable, searchable PDFs; use 600 dpi or higher only for photos and fine detail.
- Enable duplex scanning to capture both sides in one pass, and turn on blank-page removal to skip empty backs.
- Remove staples and paper clips and flatten folded pages before loading the feeder.
- Use the scanner's carrier sheet for photos, receipts and fragile originals.
Sleep and power settings
The factory sleep delay is 45 minutes. Use the auto-off or weekly timer (if offered) to switch the unit off overnight and on weekends.
Care and maintenance
| When | What to do |
|---|---|
| Monthly, or when copies show marks | Clean the scanner glass and (if equipped) the narrow ADF scanning strip with a soft cloth and a little glass cleaner applied to the cloth, not the glass. |
| At the scan count in the manual | Clean or replace the feed rollers and separation pad to prevent multifeeds and jams. |
| Every 6 months | Install firmware updates from the manufacturer and vacuum dust from the exterior vents. |
Troubleshooting
Most scanner problems come from media, consumables, connections or settings. Try these steps first; for numbered error codes, look up the code in the manufacturer's manual or support site.
| Problem | Possible cause | What to try |
|---|---|---|
| Vertical lines on scans or copies | Dust or correction fluid on the scanning glass or ADF scanning strip. | Clean the glass, the narrow scanning strip and the white backing under the document feeder. |
| Multiple pages feed at once | Worn separation pad or rollers; pages stuck together. | Fan the stack before loading, clean the rollers, and replace the roller kit if multifeeds continue. |
| Scanner not detected | USB cable or port issue; driver not installed; scanner asleep. | Try another USB port or cable, reinstall the scanning driver, and wake the scanner by pressing a button. |
| Pages jam in the document feeder | Folded, stapled, damp or very thin originals; overfilled feeder; dirty rollers. | Open the feeder cover and remove the page gently, load fewer sheets, and use a carrier sheet or the flatbed (if equipped) for delicate originals. |
| Slow to start the first job | Unit waking from sleep. | This is normal. Group jobs together; avoid disabling sleep, which raises energy use considerably. |
Frequently asked questions
What type of scanner is the Kodak S2085f?
It is a 170 ipm scanner in ENERGY STAR's standard media-size category. It is sold as the Kodak S2085f Scanner.
How fast is the Kodak S2085f?
It is rated at 170 images per minute (ipm). Actual speed depends on the document, resolution and connection.
Does the Kodak S2085f scan on both sides automatically?
Yes. Automatic duplex (two-sided) scanning is listed for this model.
How long does the Kodak S2085f take to go to sleep?
It is shipped with a default sleep delay of 45 minutes after the last job. You can change it in the control panel or web interface, but shorter delays save more energy.
Is the Kodak S2085f ENERGY STAR certified?
Yes. It appears on the ENERGY STAR certified imaging equipment list, with a certification date of July 2024.
Sources and disclaimer
Specifications on this page come from the ENERGY STAR certified printers dataset published by the U.S. Environmental Protection Agency (record certified July 11, 2024), retrieved October 7, 2026.
The setup, operating, maintenance and troubleshooting guidance is written by ManualHarbor's editors for this specific product type and configuration. It is an independent guide — not a reproduction of the manufacturer's manual — and ManualHarbor is not affiliated with Kodak. Always follow the safety instructions, installation requirements and warranty terms supplied with your unit, and contact Kodak or an authorized service provider for warranty repairs and replacement parts.
Running-cost figures use assumed U.S. average utility prices and are estimates for comparison only. See our editorial methodology for details.
Report a problem with this guide
Spotted a wrong value, a broken link or something unclear? Tell us and we will review it.