TelephonesVoIP Cordless Phone
VTech CTM-A2116 Telephone Manual
Setup, everyday use, maintenance and troubleshooting for the VoIP cordless phone system, with verified specifications.
- TypeVoIP Cordless Phone
- LineVoIP (IP network)
- Standby power0.57 W
- Est. yearly cost$0.85
About the VTech CTM-A2116
The VTech CTM-A2116 is a VoIP cordless phone system certified under the ENERGY STAR program for telephony.
It connects to your network as a Voice over IP (VoIP) endpoint rather than to an analog phone line. It is powered by an external AC adapter.
Measured standby power is 0.57 W — about 4.99 kWh or $0.85 a year if it stays plugged in around the clock, as phones normally do. That is lower than 75% of the 37 telephone models in our database.
Specifications
| Brand | VTech |
|---|---|
| Model number | CTM-A2116 |
| Phone type | VoIP Cordless Phone |
| Line technology | VoIP |
| Configuration | Cordless |
| External power adapter | Included |
| Standby (idle) power | 0.57 W |
Safety information
- Use only the power adapter and battery pack supplied with the phone or exact replacements from the manufacturer.
- Do not use the phone near water — for example near a bathtub, sink or swimming pool — and never handle it with wet hands.
- Avoid using any phone connected to outdoor wiring during a thunderstorm.
- Do not use the phone to report a gas leak while you are near the leak. Leave the area first.
- Use only the rechargeable battery type specified for the handset. Never install non-rechargeable (alkaline) batteries, and do not dispose of batteries in a fire; recycle them according to local rules.
- A VoIP phone works only when its network, power source (PoE switch or adapter) and phone service are up. Keep an alternative way to call 911 during outages.
Setup
- Connect to the network
Connect the phone's LAN port to a network switch port with an Ethernet cable. Plug in the AC adapter.
- Provision the phone
Most business VoIP phones are configured automatically from the phone system or by your administrator. For manual setup, enter the SIP account, server and credentials from your service provider in the phone's web interface.
- Charge and register handsets
Charge each handset fully, then register it to the base station following the manual or the base's web interface.
Using your phone
Calls and audio
- Adjust the earpiece or speaker volume during a call with the volume keys; the setting is usually remembered for the next call.
- Call quality on VoIP depends on the network. If voices break up, ask your administrator to prioritize voice traffic (QoS) or use a wired connection.
- Return the handset to its charger after calls so it stays charged.
Handset battery care
Leaving the handset in the charger does not harm modern battery packs. If talk time drops noticeably, clean the charging contacts and, if needed, replace the battery with the type specified by the manufacturer. Remove the battery if the handset will be stored for several months.
Range and interference
Walls, floors, metal cabinets and appliances reduce range. If calls crackle or drop near the edge of range, move closer to the base or relocate the base to a higher, more central position.
Power use
Phones stay powered all the time, so standby power is what matters. This model draws 0.57 W when idle.
Care and maintenance
| When | What to do |
|---|---|
| Weekly | Wipe the handset, keypad and display with a soft cloth lightly dampened with water or a mild disinfectant wipe; do not spray liquids directly on the phone or use solvents. |
| Monthly | Clean the charging contacts on the handset and charger with a dry cloth or pencil eraser to ensure reliable charging. |
| Every 6 months | Check cords and plugs for damage, and confirm the phone is running the firmware version your administrator or provider recommends. |
| When talk time drops | Replace the handset battery pack with the type specified by the manufacturer. |
Troubleshooting
Try these steps before calling for service. For model-specific error messages, consult the manufacturer's manual or your phone system administrator.
| Problem | Possible cause | What to try |
|---|---|---|
| Phone does not power on | Adapter not connected; outlet off. | Check the adapter connections and outlet. |
| "No service" or registration failed | Network or VLAN settings; provisioning error; account not active. | Restart the phone, confirm it obtains an IP address, and ask your administrator or provider to verify the account and provisioning. |
| Choppy audio, echo or one-way audio | Network congestion; firewall/NAT settings; Wi-Fi interference. | Use a wired connection, enable QoS for voice, and have the administrator check firewall SIP and RTP settings. |
| Handset shows "Searching" or "Out of range" | Base unpowered; handset too far away; handset not registered. | Check base power, move closer, and re-register the handset to the base following the manual. |
| Battery runs down quickly | Worn battery pack; dirty charging contacts; handset not seated in charger. | Clean the contacts, check that the charge indicator lights, and replace the battery pack if needed. |
| Display or keys unresponsive | Temporary software fault. | Restart the phone by disconnecting power (or removing the handset battery) for 30 seconds. |
Energy use and running costs
The VTech CTM-A2116 draws 0.57 W in standby — the idle state it spends nearly all of its time in, measured with the handset charged and docked. Plugged in 24 hours a day, 365 days a year, that is about 4.99 kWh per year, or $0.85 at $0.17 per kWh.
Talk time adds very little energy compared with standby, because calls are short relative to the hours the phone sits idle.
Frequently asked questions
What kind of phone is the VTech CTM-A2116?
It is a VoIP cordless phone system.
How much electricity does the VTech CTM-A2116 use?
It draws 0.57 W in standby, about 4.99 kWh per year — roughly $0.85 at $0.17/kWh if left on continuously.
Will the VTech CTM-A2116 work during a power outage?
Only if the network equipment is on backup power and your phone service is up. Keep another way to call 911.
Is the VTech CTM-A2116 ENERGY STAR certified?
Yes. It is on the ENERGY STAR certified telephony list, with a certification date of September 2022.
Sources and disclaimer
Specifications on this page come from the ENERGY STAR certified telephones dataset published by the U.S. Environmental Protection Agency (record certified September 25, 2022), retrieved October 7, 2026.
The setup, operating, maintenance and troubleshooting guidance is written by ManualHarbor's editors for this specific product type and configuration. It is an independent guide — not a reproduction of the manufacturer's manual — and ManualHarbor is not affiliated with VTech. Always follow the safety instructions, installation requirements and warranty terms supplied with your unit, and contact VTech or an authorized service provider for warranty repairs and replacement parts.
Running-cost figures use assumed U.S. average utility prices and are estimates for comparison only. See our editorial methodology for details.
Report a problem with this guide
Spotted a wrong value, a broken link or something unclear? Tell us and we will review it.