UPS Battery BackupsOnline Double-Conversion
Eaton 9PX2200GRT-L UPS Battery Backup Manual
Setup, everyday use, maintenance and troubleshooting for the 2,200 VA / 2,200 W rack-mount online double-conversion UPS, with verified specifications.
- Rating2,200 VA / 2,200 W
- TopologyOnline Double-Conversion
- Efficiency93.1%
- Runtime at half load9 min
About the Eaton 9PX2200GRT-L
The Eaton 9PX2200GRT-L is a 2,200 VA / 2,200 W rack-mount online double-conversion UPS certified under the ENERGY STAR program for uninterruptible power supplies.
It can support up to 2,200 W of connected equipment (2,200 VA apparent power, a 1.00 output power factor). It is rated for 200–240 V, 50/60 Hz input. Energy storage is a lithium-ion battery (internal), with a 2-year warranty listed in the certification record.
ENERGY STAR weighted efficiency is 93.1%, and 92.5% at half load. With nothing connected it draws 48.1 W. Its weighted efficiency is higher than 50% of the 150 Online Double-Conversion models in our database.
The manufacturer lists it for consumer, commercial, and data center applications.
Specifications
| Brand | Eaton |
|---|---|
| Model number | 9PX2200GRT-L |
| Topology | Online Double-Conversion |
| Apparent power rating | 2,200 VA |
| Real power rating | 2,200 W |
| Output power factor (W/VA) | 1.00 |
| Default normal mode | VFI (voltage and frequency independent) |
| Intended applications | Consumer, Commercial, Data Center |
| Rated input voltage | 200–240 V |
| Rated output voltage | 200–240 V |
| Input frequency | 50/60 Hz |
| Battery technology | Lithium-ion |
| Battery location | Internal |
| Runtime at full load | 4 min |
| Runtime at half load | 9 min |
| Battery warranty | 2 years |
| Weighted efficiency (ENERGY STAR) | 93.1% |
| Efficiency at 25% load | 89.3% |
| Efficiency at 50% load | 92.5% |
| Efficiency at 75% load | 93.3% |
| Efficiency at 100% load | 93.2% |
| Input power at no load | 48.1 W |
| Input power factor | 1.00 |
| Rack-mountable | Yes |
| Rack height | 2 U |
| Height | 2.3 in. |
| Width | 17.3 in. |
| Depth | 23.8 in. |
| Modular design | No |
| Manufacturer take-back program | No |
Safety information
- Units of this size may require a dedicated circuit, a locking plug or hardwired connection. Have a licensed electrician verify the circuit and receptacle for the 200–240 V input rating before installation.
- The UPS contains a battery that can deliver dangerous energy even when the unit is unplugged, and its outlets may be live on battery power. Do not open the enclosure except to replace batteries as described in the manual.
- Install the UPS indoors in a clean, dry, well-ventilated location away from heat sources and direct sunlight. Lithium-ion batteries must be kept within the temperature range in the manual.
- Battery-equipped UPS units are heavy. Use at least two people (or a lift) to move or rack-mount the unit, and install it in the lowest available rack position to keep the rack stable.
Installation and first-time setup
Size the load first. Add up the wattage of the equipment you plan to protect (check each power supply label or measure it with a plug-in meter). Keep the total below the 2,200 W rating — ideally under about 1,760 W (80%) to leave headroom for start-up surges and battery aging. The 2,200 VA figure is apparent power; the watt rating is the one that limits most modern IT equipment.
- Inspect and position
Unpack the UPS and check for shipping damage. For rack installation, mount the rails (it occupies 2U) and slide the UPS in with a helper; tower units stand upright on a hard floor.
- Connect the battery
Many UPS units ship with the battery disconnected for safety. If so, connect it as shown in the quick-start guide before plugging in.
- Connect input power
Connect the UPS to its dedicated circuit (200–240 V) as specified in the installation manual.
- Charge the battery
Turn the UPS on and let it charge for several hours before relying on full runtime. Equipment can be connected and used during charging, but runtime will be limited until the battery is full.
- Connect equipment
Connect the critical equipment to the UPS output receptacles or power distribution unit, keeping within the rated load.
- Run a self-test
Once the battery is charged, start a self-test from the front panel or software to confirm that the UPS transfers to battery correctly.
Using your UPS
How this UPS protects your equipment
As an online double-conversion UPS, it continuously converts incoming AC to DC and back to clean AC, so connected equipment is isolated from voltage and frequency disturbances and there is no transfer time when the utility fails. Its default operating mode is classified as VFI (voltage and frequency independent).
Battery runtime
According to the certification record, the internal battery provides about 4 minutes at full rated load (2,200 W) and about 9 minutes at half load (1,100 W). Runtime is not linear — halving the load usually more than doubles it — and it falls as the battery ages or gets warm. Use the runtime to ride through short outages and to shut systems down cleanly during longer ones.
Alarms and everyday use
- An intermittent beep usually means the UPS is running on battery. Save your work; if the outage continues, shut down connected equipment before the low-battery alarm.
- A continuous tone or overload indicator means the connected load is too high. Unplug non-essential devices from the battery outlets.
- Leave the UPS switched on and plugged in at all times so the battery stays charged.
Care and maintenance
| When | What to do |
|---|---|
| Monthly | Check the front-panel status or software for alarms, confirm the load percentage, and make sure vents are clear of dust and obstructions. |
| Every 6 months | Run a self-test (or confirm the automatic self-test passed). Where supported, perform a runtime calibration during a maintenance window, as it discharges the battery. |
| At the interval in the manual | Replace lithium-ion modules when the UPS reports end of life; they generally last much longer than lead-acid batteries. |
| Annually | Check for firmware and software updates and confirm that automatic shutdown still works by running a controlled test. |
Troubleshooting
Use the front-panel indicators, display messages and event log to narrow down problems. For specific alarm codes, consult the manufacturer's manual or support line.
| Problem | Possible cause | What to try |
|---|---|---|
| UPS will not turn on | Battery disconnected or deeply discharged; input breaker or fuse open; no utility power. | Check the battery connection, verify the outlet or input breaker, and let the UPS charge for several hours before trying again. |
| Beeps and runs on battery with power present | Input voltage or frequency outside limits; loose input plug; generator power. | Check the input connection, try a different circuit, and adjust input sensitivity if the manual permits. |
| Overload alarm | Connected load above the rating; high inrush device on battery outlets. | Reduce the load below 2,200 W and move printers or heaters off the UPS. |
| Short runtime or self-test failure | Aged or hot battery; battery not fully charged. | Charge fully and retest; replace the battery if runtime remains well below the rated figures. |
| Replace-battery indicator on | Battery at end of life. | Order the specified replacement battery and replace it as described in the manual (or by service for larger units). |
| Site wiring fault indicator | Missing ground or reversed hot/neutral in the building wiring. | Have a qualified electrician inspect the outlet and wiring before connecting equipment. |
Energy use and running costs
A UPS uses energy as conversion and charging losses on top of what your equipment consumes. The Eaton 9PX2200GRT-L has an ENERGY STAR weighted efficiency of 93.1%. The table estimates its losses if it supports a steady load 24 hours a day, 365 days a year, at $0.17 per kWh.
| Load | Efficiency | Power lost | Losses per year | Cost per year |
|---|---|---|---|---|
| 25% (550 W) | 89.3% | 65.9 W | 577 kWh | $98.14 |
| 50% (1,100 W) | 92.5% | 89.2 W | 781 kWh | $133 |
| 75% (1,650 W) | 93.3% | 118 W | 1,038 kWh | $176 |
| 100% (2,200 W) | 93.2% | 161 W | 1,406 kWh | $239 |
Even with nothing connected, the UPS draws about 48.1 W to keep its electronics and battery charger running — around 422 kWh ($71.69) a year.
Loading a UPS very lightly lowers its efficiency, so choosing a unit sized reasonably close to your actual load keeps losses down.
Frequently asked questions
How much equipment can the Eaton 9PX2200GRT-L power?
It is rated at 2,200 W (2,200 VA). Keep the connected load below that — ideally under about 1,760 W — to allow for surges and battery aging.
How long will the Eaton 9PX2200GRT-L run on battery?
The certification record lists 4 minutes at full load and 9 minutes at half load. Lighter loads run longer; older or warm batteries run shorter.
What type of UPS is the Eaton 9PX2200GRT-L?
It uses an online double-conversion topology and defaults to VFI (voltage and frequency independent) operation. Double conversion gives the highest level of power conditioning with zero transfer time.
How efficient is the Eaton 9PX2200GRT-L?
Its ENERGY STAR weighted efficiency is 93.1%. At half load (1,100 W) it is 92.5% efficient, losing about 89.2 W — roughly $133 a year if run continuously at $0.17/kWh.
What battery does the Eaton 9PX2200GRT-L use?
It uses a lithium-ion battery (internal). The certification record lists a 2-year battery warranty.
Sources and disclaimer
Specifications on this page come from the ENERGY STAR certified ups battery backups dataset published by the U.S. Environmental Protection Agency (record certified July 11, 2021), retrieved October 7, 2026.
The setup, operating, maintenance and troubleshooting guidance is written by ManualHarbor's editors for this specific product type and configuration. It is an independent guide — not a reproduction of the manufacturer's manual — and ManualHarbor is not affiliated with Eaton. Always follow the safety instructions, installation requirements and warranty terms supplied with your unit, and contact Eaton or an authorized service provider for warranty repairs and replacement parts.
Running-cost figures use assumed U.S. average utility prices and are estimates for comparison only. See our editorial methodology for details.
Report a problem with this guide
Spotted a wrong value, a broken link or something unclear? Tell us and we will review it.